Differences between revisions 3 and 4
Revision 3 as of 2009-11-29 09:36:11
Size: 1054
Comment:
Revision 4 as of 2009-12-01 07:29:04
Size: 2499
Comment:
Deletions are marked like this. Additions are marked like this.
Line 7: Line 7:
Annealing == Annealing ==
Line 9: Line 9:
Local high temperature annealing can be performed with localized heaters driven by most of the solar cell. This repairs some kinds of displacement damage. Horizontal thermal conductivity is poor on server-sats. Assuming zero albedo perfect black body surfaces on both sides (the worst case, hardest to heat), the black body radiation power is $ P=2 A \times 5.67E-12 \times T^4 $ where A is the area in square centimeters, P is the power in watts, and T is the temperature in Kelvin. Assuming a power of 4 watts, the heatable areas at various temperatures are : When radiation-damaged silicon is heated, the interstitials and vacancies become more mobile, and are more likely to recombine. Assume that this process takes 3.1 years - 100 million seconds - at 60C, and the activation energy for defect mobility is 1.3 electron volts, corresponding to a "hotness" temperature of H = 15000K. The speedup factor F as a function of temperature is $ F(T) = e^{ (H/333-H/T)} and is shown in the table below.
Line 11: Line 11:
|| Temperature || Area ||
|| 150C || 11.02 cm^2^ ||
|| 200C || 7.04 cm^2^ ||
|| 250C || 4.71 cm^2^ ||
|| 300C || 3.27 cm^2^ ||
Local high temperature annealing can be performed with localized heaters driven by most of the solar cell. This repairs some kinds of displacement damage. Horizontal thermal conductivity is poor on server-sats. Assuming zero albedo perfect black body surfaces on both sides (the worst case, hardest to heat), the black body radiation power is $ P=2 A \sigma T^4 $ where A is the area in square centimeters, P is the power in watts, $\sigma$ = 5.67E-8 is the blackbody constant, and T is the temperature in Kelvin. Sunlight absorption adds $P_0 = $ 0.1366W per square centimeter. This results in an area of $ A = P / ( 2 \sigma T^4 - P_0 ) $ Assuming a power of 4 watts, and a cell area of 176.7 cm^2^, and anneals every month, the heatable areas at various temperatures are:
Line 17: Line 13:
These temperatures should be adequate to anneal damage in seconds. Addressing individual chips and small sections of the solar cell one by one, a full anneal of a server-sat should take less than an hour. || Temperature || Area cm^2 || Speedup || Anneal min || Time Fraction ||
|| 60C || 1408.03 || 1.0E+0 || 209156.80 || 4.77E+0 ||
|| 75C || 134.61 || 7.1E+0 || 310443.30 || 7.08E+0 ||
|| 100C || 48.25 || 1.3E+2 || 47404.53 || 1.08E+0 ||
|| 125C || 27.04 || 1.6E+3 || 6668.81 || 1.52E-1 ||
|| 150C || 17.66 || 1.5E+4 || 1086.64 || 2.48E-2 ||
|| 175C || 12.49 || 1.1E+5 || 210.01 || 4.79E-3 ||
|| 200C || 9.28 || 6.7E+5 || 47.69 || 1.09E-3 ||
|| 225C || 7.13 || 3.3E+6 || 12.52 || 2.86E-4 ||
|| 250C || 5.62 || 1.4E+7 || 3.73 || 8.52E-5 ||
|| 275C || 4.51 || 5.2E+7 || 1.25 || 2.84E-5 ||
|| 300C || 3.68 || 1.7E+8 || 0.46 || 1.05E-5 ||


The last time is the fraction of the monthly cycle taken up by annealing, addressing individual chips and small sections of the solar cell one by one. An '''anneal temperature of 200C''' means that 0.11% of the monthly cycle is spent annealing rather than computing.

Radiation Damage

MORE LATER - problem description.

Annealing

When radiation-damaged silicon is heated, the interstitials and vacancies become more mobile, and are more likely to recombine. Assume that this process takes 3.1 years - 100 million seconds - at 60C, and the activation energy for defect mobility is 1.3 electron volts, corresponding to a "hotness" temperature of H = 15000K. The speedup factor F as a function of temperature is $ F(T) = e^{ (H/333-H/T)} and is shown in the table below.

Local high temperature annealing can be performed with localized heaters driven by most of the solar cell. This repairs some kinds of displacement damage. Horizontal thermal conductivity is poor on server-sats. Assuming zero albedo perfect black body surfaces on both sides (the worst case, hardest to heat), the black body radiation power is P=2 A \sigma T^4 where A is the area in square centimeters, P is the power in watts, \sigma = 5.67E-8 is the blackbody constant, and T is the temperature in Kelvin. Sunlight absorption adds P_0 = 0.1366W per square centimeter. This results in an area of A = P / ( 2 \sigma T^4 - P_0 ) Assuming a power of 4 watts, and a cell area of 176.7 cm2, and anneals every month, the heatable areas at various temperatures are:

Temperature

Area cm^2

Speedup

Anneal min

Time Fraction

60C

1408.03

1.0E+0

209156.80

4.77E+0

75C

134.61

7.1E+0

310443.30

7.08E+0

100C

48.25

1.3E+2

47404.53

1.08E+0

125C

27.04

1.6E+3

6668.81

1.52E-1

150C

17.66

1.5E+4

1086.64

2.48E-2

175C

12.49

1.1E+5

210.01

4.79E-3

200C

9.28

6.7E+5

47.69

1.09E-3

225C

7.13

3.3E+6

12.52

2.86E-4

250C

5.62

1.4E+7

3.73

8.52E-5

275C

4.51

5.2E+7

1.25

2.84E-5

300C

3.68

1.7E+8

0.46

1.05E-5

The last time is the fraction of the monthly cycle taken up by annealing, addressing individual chips and small sections of the solar cell one by one. An anneal temperature of 200C means that 0.11% of the monthly cycle is spent annealing rather than computing.

MORE LATER

RadiationDamage (last edited 2013-02-17 05:20:50 by KeithLofstrom)